User`s manual

NetWare
UNIX
Windows
OS/2
Macintosh
AXIS 1620 User’s Manual Section 9: Management & Configuration
99
Section 9 Management & Configuration
The management and configuration tools that are supported by the
AXIS 1620 allow you to:
• Change the print server parameters, i.e. editing the config file
• Receive extended information about the print jobs
• Receive printer port status
• Monitor your printers
• Reset the AXIS 1620
• Upgrade the AXIS 1620 firmware (Refer to Section 11 Upgrading
the Software, on page 139)
Configuration
Overview
The method you should use to manage and configure your AXIS 1620
is dictated by the operating system protocols of your network. The
table below displays which method to use for each supported
environment.
Operating System Protocols Configuration/Management methods
IPX/SPX
(NetWare)
• AXIS NetPilot - See page 112
• Netspot - See page 105
• Novell Utilities - See page 128
TCP/IP
(UNIX,
Windows 95/98/NT/2000,
Windows 3.1/WfW,
NetWare Pure IP, OS/2)
• Web Browser - See page 100
• Netspot - See page 105
• AXIS ThinWizard - See page 108
• FTP - See page 120
• Telnet - See page 123
• SNMP - See page 126
NetBIOS/NetBEUI
(Windows 95/98/NT/2000,
Windows 3.1/WfW, OS/2)
• AXIS NetPilot - See page 112
• Netspot - See page 105
AppleTalk • Web browser - See page 100
• Netspot - See page 105
• Mac-FTP - See page 120
• AXIS NetPilot via a PC platform in the
same network - See page 112