User`s manual

AXIS 210/211 - UPnPTM

UPnP

functionality is enabled by default in the AXIS 210/211. If also enabled on your

computer (Windows ME or XP), the camera will automatically be detected and a new icon

will be added to “My Network Places.” Click this icon to access the camera. See page 15 for

instructions on how to set the password.

Notes:

Manual Installation with AXIS IP Utility

Requirements:

AXIS IP Utility

1. Acquire an unused IP address for the AXIS

210/211. This IP address must be on the same

subnet as your computer.

2. Insert the CD into your computer’s CD drive. Start

AXIS IP Utility.

3. Enter the camera’s serial number and IP address.

Click Set IP.

4. Check that the network cable is connected. When prompted by AXIS IP Utility,

start/restart the camera, by disconnecting and reconnecting the power cable, or the

network cable if using PoE (AXIS 211 only).

• To install the UPnP

service on your computer, open the Control Panel from the Start Menu and

select Add/Remove Programs. Select Add/Remove Windows Components and open the Network-

ing Services section. Click Details and then select UPnP as the service to add.

• Once the AXIS 210/211 is accessible from your computer, it is then possible to use the One-click

installation method to provide the camera with a DNS name. See the previous page.

UPnP

is a certification mark of the UPnP

Implementers Corporation.

AXIS 210/211 Network Camera

Computer

on a LAN

Hub/Switch

AXIS IP Utility is a free Windows application that installs the AXIS 210 to your local network using a static IP address. AXIS

IP Utility is available on the CD supplied with this package, or from www.axis.com/techsup/software

The serial number (S/N) is on the label on

the underside of the AXIS 210/211.