Technical data

2400 Series Microwave Synthesizer: Accessories & Options
A-2 2400 Series Operation Manual, 33237 Revision A, May 2004
A.1 Accessories
A.1.1 A001: Cable Kit (SMA)
This accessory kit furnishes two coaxial cables (18 and 72-inches) with connectors for interfacing to
user-supplied signal sources.
A.1.2 AO11: Ruggedized Carrying Case
This is a special ruggedized carrying case for transporting the instrument between work sites. It can
be ordered from Giga-tronics with part number 29855.
A.2 Options
A.2.1 Option 22: Rear RF Output
This option moves the RF Output connector to the rear panel and is available for the 2400L/2400M
Series. Rear RF Output is standard for the 2400A Series.
A.2.2 Option 24: Internal Modulation Generator
This option is only available for the 2400M and 2400AM Series. The Internal Modulation Generator
internally drives all the modulation functions available in the 2400M/AM Series.
A.2.3 Option 26: Step Attenuator
Under this option, an attenuator is placed in the RF output path of the instrument, which provides up
to 110 dB of attenuation in 10 dB increments.
Use part number 29937 to order Option 26 for the 2400L Series Microwave Synthesizers. Use part
number 29938 to order Option 26 for the 2400AL Series Microwave Synthesizer.
This option has been incorporated in the main body of the manual. Where a procedure or specifica-
tion applies only to instruments with Option 26, a note to that effect is included.