Technical data

Native Command Script
2400 Series Operation Manual, 33237 Revision A, May 2004 C-3
C.2 Native Command Script
C.2.1 Simple CW
C.2.2 Comprehensive CW
12 LIST:POW -10.000, -5.000, 0.000 Set power to -10, -5 and 0 dBm separately.
13 LIST:DWEL 0.200000 S Set dwell(step) time to 0.2 second
14 LIST:PRECompute? 1 Pre-compute the created list data
15 LIST:REPeat STEP Set list repeat type to single step
16 TRIGger:SOURce EXT Set list trigger mode to External trigger.
Note: a user will trigger the list with an
external device.
Sequence Command Description
1 CW 10 GHZ Set the CW frequency to 10 GHz.
2 PL 0 DB Set the CW power to 0 dBm.
3RF 1 Turn the RF on.
Sequence Command Description
1 CW 10 GHZ Set the CW frequency to 10 GHz
2 PL 0 DB Set the CW power to 0 dBm.
3 AT 10 DB Set the attenuation to MANAUL mode at 10 dB.
4 SHRL Set the attenuation to AUTO mode.
5RF 1 Turn the RF on.
Sequence Command Description