Technical data

Chapter 1:
1-2 2400 Series Operation Manual, 33237 Revision A, May 2004
All 2400 Series Microwave Synthesizers comply with MIL-PRF-28800F, Class 3
1.1.1 2400 Options
• Option 22- Rear RF Output, available for 2400L and 2400M models only. standard for the 2400AL
and 2400AM standard
• Option 24- Internal Modulation Generator, 2400M and 2400AM only
• Option 25-100 kHz frequency extension, available on all 2400 Series. Not available for 40 GHz
models.
• Option 26- 90 dB Step Attenuator, all models
• Option 28- High Stability Timebase, available for 2400A Series only
• Option 43- Frequency and Power Sweep
• Option 45- Rack Ears
• Option 48- Automation Xpress Interface (AXI) for use with Giga-tronics Automation Xpress Software
1.1.2 Items Furnished
Accessories and Options are detailed in Appendix A of this publication. In addition to the options
and/or accessories specifically ordered, the following items are furnished with the instrument:
• Operations Manual (P/N 33237)
• WaveMaker User Guide (P/N 33216)
• WaveMaker Software CD-ROM (P/N 33105)
• USB/RS-232 Cable Adapter
• Power Cord, 6 ft.
Low SSB Phase Noise -92 dBc/Hz, 10 kHz offset @ 10 GHz
Excellent Output Power >+15 dBm to 20 GHz, > +9 dBm to 40 GHz
Fast Frequency Switching <500 µSec. typical, List Mode
Settable Level Range: +25 dBm to -110 dBm
WaveMaker Software Included
USB/RS-232 Adapter: Included
Table 1-1: 2400 Series Features