Technical data

General Information
2400 Series Operation Manual, 33237 Revision A, May 2004 1-5
DO NOT position the equipment so that it is difficult to operate the disconnecting device (to remove
the AC line cord).
1.2.6 Line Fuse
All 2400 Series models have a line fuse container on the rear panel.
1.2.6.1 Fuse Installation
All 2400 Series models have a power line fuse that is 2A, Slo-Blo, 250V, Type T (Illustration 1.1 below
for location).
Illustration 1.1 | Fuse Holder
1.2.6.2 Fuse Replacement
Pull out the small drawer on the right side of the housing (marked with an arrow) and remove the old
fuse. Replace with a new fuse, insert the drawer and close the housing cover, see illustration above.
WARNING
CAUTION
1
1
0
1
2
0
COVER
FUSE AND
FUSE HOLDER
AC POWER
INPUT