Technical data

Chapter 1:
1-6 2400 Series Operation Manual, 33237 Revision A, May 2004
1.3 Inputs/Outputs
Input/Output connectors for the 24XXL/M models are shown in Illustration 1.2. Table 1-2 contains
the front and rear panel I/O connector functional descriptions for all models.
1.3.1 Front Panel I/O Connectors
1.3.1.1 RF Out
This is the instrument’s RF output is located on the front panel for the 2400L and 2400M Series Syn-
thesizer models. The RF output is located on the rear panel for the 2400AL and 2400AM Series Synthe-
sizer models. Illustration 1.2 shows the panel interface located on the front of all 2400L and 2400M
Series models. All other connectors are type BNC unless otherwise stated.
Illustration 1.2 | Series 2400L/M Front Panel Output
1.3.2 Rear Panel Interface and I/O Connectors
This section defines the functions and interface of the 2400L/AL and 2400M/AM rear panel (See Illus-
tration 1.3). The RF Out connector is located on the front panel for the 2400L/M Series. The RF Out
connector is located on the rear panel for the 2400AL/AM Series and 2400L/M Series with option 22
installed. (See Section 1.3 for details on Inputs and Outputs).
2400L/M Front Panel I/O
ALC IN
RF OUT
RF ON