Technical data

Chapter 1:
1-8 2400 Series Operation Manual, 33237 Revision A, May 2004
* L - 2400L series, M - 2400M series, AL - 2400AL series, AM - 2400AM series
RAMP OUT L, M,(Option 43) 0 to 10 volt ramp output scaled to frequency sweep.
AM IN
M, AM
External AM input 600
Ω. Any waveform compatible with
bandwidth considerations. 1 Vp-p for 50% depth.
FM IN
M, AM
External FM 50
Ω input. Any waveform compatible with
bandwidth considerations. 1 Vp input for maximum
deviation.
PM IN
M, AM
+5.0 volt, 50 Ω input.
PM TRIGGER IN
M, AM
+5.0 volt, 50
Ω input. Triggers a delayed pulse output
specified in Internal PM menu (Option 24 required).
AM OUT
M, AM (Option 24)
Modulation generator output, 2 Vp-p into 10 k
Ω.
FM OUT
M, AM (Option 24)
Modulation generator output, 2 Vp-p into 10 k Ω.
PM OUT
M, AM (Option 24)
+4.0 volt video representation of the pulsed signal output
at 50 Ω.
PM SYNC OUT
M, AM (Option 24)
50 ns width, TTL level output into 50
Ω. Coincident with
Pulse trigger event + 30 ns.
GPIB Interface
L, M, AL, AM
IEEE STD 488.2 General purpose instrument bus.
RS-232
L, M, AL, AM
Serial Interface, DB9 connector.
AC Power Input
L, M, AL, AM
90-253 VAC, auto-sensing, 47 Hz to 64 Hz.
Table 1-2: 2400 Series Rear Panel I/O Connector Descriptions
I/O Connector
Name
2400 Series Availability Description