Technical data

Front Panel Operation

2400 Series Operation Manual, 33237 Revision A, May 2004 2-7

2.3.6 Configure a Ramp Frequency Sweep (Option 43)

For Ramp frequency sweep operation, press the RAMP button to access the RAMP menu. Option 43

must be installed. If option 43 is not installed, a status message will appear at the bottom of the dis-

play indicating that option 43 is not installed. After a ramp calculation is performed by the 2400, the

unit will continuously sweep. There is no provision for an externally triggered ramp sweep.

Illustration 2.4 | Ramp Frequency Menu

2.3.6.1 Ramp Frequency Sweep Parameters

2.3.6.1.1 Start Frequency

Press the Start Frequency softkey. Edit the start frequency using the numeric keypad,

step keys or rotary knob.

2.3.6.1.2 Stop Frequency

Press the Stop Frequency softkey. Edit the stop frequency using the numeric keypad,

step keys or rotary knob.

2.3.6.1.3 Power

Press the Power softkey. Edit the power setting of the frequency ramp sweep using

the numeric keypad, step keys or rotary knob.

2.3.6.1.4 Sweep Time

Press the Sweep Time softkey. Edit the sweep time of the ramp frequency sweep

using the numeric keypad, step keys or rotary knob.

RAMP FREQ MENU

OFS SLP

4900.0000000 MHz

12600.0000000 MHz

10.00 dBm

200 msec

Start Frequency

Stop Frequency

Sweep Time

Power

401

Resolution

Ramp Power