Technical data

Front Panel Operation
2400 Series Operation Manual, 33237 Revision A, May 2004 2-11
Illustration 2.7 | System Menu 2
2.3.9 Using Modulation
(NOT AVAILABLE IN 2400L/AL SERIES)
The 2400M/AM Series offers three types of output modulation; AM, FM, and PM. The modulation
menu and parameters will be displayed when you press the [AM], [FM], and [PM] soft keys located on
the front panel.
2.3.9.1 Amplitude Modulation
If the operating menu is not in the AM menu, press the AM Menu button.
To activate and deactivate AM, press the AM softkey to move the cursor to the On/Off selection. Press
the Step Up key or Step Down key to toggle the AM state. The AM indicator will be displayed on the
menu when AM is active. Press in the AM menu softkey (i.e AM 2/3) to cycle the display to the desired
AM menu (option 24 only).
2.3.9.1.1 External Source (AM Menu 1)
Press the Sensitivity softkey of the AM External Source menu to move the cursor to the Sensitivity
parameter. Edit sensitivity parameter using the numeric keypad, step up/step down keys or the rotary
knob. The maximum allowable setting is 95%/volt.
SYSTEM 2
6
SCPI
GPIB Address
Language
Interface
General Information
Model: GT2400L
Version: XXXX
Serial Number: XXXX
Build Date/Time: Dec 1 2003, 18:40:31
System 1
Menu