Technical data

Chapter 3: Remote Operation
3-8 2400 Series Operation Manual, 33237 Revision A, May 2004
[SOURce]:AM:SCALing d
Sets the external amplitude modulation scaling to a percentage per
volt value
[SOURce]:AM:SCALing?
Queries the external amplitude modulation scaling. Return value is a
percentage per volt
[SOURce]:AM:SOURce INTer-
nal|EXTernal
Sets the amplitude modulation source to internal or external
[SOURce]:AM:SOURce?
Queries the amplitude modulation source. Returns "INTernal" or
"EXTernal"
[SOURce]:AM:STATe ON|OFF|1|0
Sets the amplitude modulation state to "On" or "Off"
[SOURce]:AM:STATe?
Queries the amplitude modulation state. Returns "1" for on or "0" for
Off
[SOURce]:FM:BANDwidth NAR-
Row|WIDE
Sets the Frequency Modulation bandwidth to Narrow or Wide
[SOURce]:FM:BANDwidth?
Queries the Frequency Modulation bandwidth. Return "Narrow" or
"Wide"
[SOURce]:FM[DEViation] d
Sets the Frequency Modulation internal deviation to d. (Requires
Option 24)
[SOURce]:FM[DEViation]?
Queries the Frequency Modulation internal deviation. Return value is
in Hertz. (Requires Option 24)
[SOURce]:FM:INTernal:FREQuency
d
Sets the Frequency Modulation internal rate to d. (Requires Option
24)
[SOURce]:FM:INTernal:FREQuency?
Queries the Frequency Modulation internal rate. Return value is in
Hertz. (Requires Option 24)
[SOURce]:FM:INTernal:FUNC-
tion:SHAPe OFF|SINE|SQUare|TRI-
angle|PraMP
Sets the shape of the internal frequency modulation generator
waveform. (Requires Option 24)
[SOURce]:FM:INTernal:FUNC-
tion:SHAPe?
Queries the shape of the internal frequency modulation generator
waveform
Returns: "Off", "Sine", "Square", "Triangle", "Pos Ramp", (Requires
Option 24)
[SOURce]:FM:SENSitivity d
Sets the Frequency Modulation external sensitivity to d
[SOURce]:FM:SENSitivity?
Queries the Frequency Modulation external sensitivity. Return value is
in Hertz/Vpeak
[SOURce]:FM:SOURce EXTer-
nal|INTernal
Sets the frequency modulation source to internal or external
[SOURce]:FM:SOURce?
Queries the frequency modulation source. Returns "Internal" or
"External"
[SOURce]:FM:STATe ON|OFF|1|0
Sets the frequency modulation state to "On" or "Off"
[SOURce]:FM:STATe?
Queries the frequency modulation state. Returns "1" for on or "0" for
Off
[SOURce]:PULM:EXTernal:POLarity
NORMal|INVerted
Sets the pulse modulation polarity to Normal or Inverted
Command Description