Technical data

Specifications: 2400M Series Only
2400 Series Operation Manual, 33237 Revision A, May 2004 4-7
4.2 Specifications: 2400M Series Only
All specifications apply over a 0 to +55°C range after 30 minutes warm-up time unless otherwise
stated.
4.2.1 Amplitude Modulation (AM)
4.2.2 Scan Modulation
Specifications apply to frequencies below 20 GHz.
Parameter Specification
Depth -20 dBm to maximum available power
Rate (3 dB Bandwidth, 30% depth)
DC - 5 kHz (frequency = less than 2 GHz)
DC - 10 kHz (frequency = greater than or equal to 2
GHz)
Sensitivity 10 - 95% / V selectable
Accuracy ± 10 % of setting at 1 kHz, 0 - 90%/V
Input
Range: ± 1 V
Impedance: 600 Ω
Parameter Specification
Scan Time 200 ms - 10 sec
Maximum Number of Points 4000
Minimum Time Per Point 1 ms
Scan Pattern
Sin (X)
X
Minimum Number of Lobes 1
Depth > 60 dB