Technical data

2400 Series Operation Manual, 33237 Revision A, May 2004 A v
Giga-tronics: Serial, Code, Models, Option or Configuration Label
Examine the serial, code, model number, option or configuration label affixed to the rear panel of the 2400
Microwave Synthesizer.
Serial Number
Each instrument has a seven-digit serial number, shown on the label of the rear panel.
Code Number
Each instrument has a two-digit code, referred to as the Manufacturing Configuration Code.
Model Number
Each instrument has a four-digit model number, and one or two suffix character which designates the
series (2400X) and (24XXL); Model Type (24XXL) and (24XXAL) CW, No Modulation;
Model Type (24XXM) and (24XXAM), CW, Modulation.
Frequency Range (2408L/M) and (2408AL/AM) 0.01 to 8 GHz, (2420L/M) and (2420AL/AM) 0.01 to 20 GHz,
(2426L/M) and (2426AL/AM) 0.01 to 26.5 GHz, (2440L/M) and (2440AL/AM) 0.01 to 40 GHz,
Option Number
When options are installed, one or more 2 digits numbers are on the line which correspond to the option
numbers in Appendix A.
Configuration Number
If the configuration line contains a three digit (e.g 241), there is combination of options and/or special
modifications installed in the instrument. Information relating to special configurations will be contained
in supplemental pages included with this manual.
This table is provided for your convenience to maintain a permanent record of publication change data.
Replacement pages will be issued as TCPI (Technical Change Publication Instructions), and will be inserted
at the front of the binder. Remove the corresponding old pages, insert the new pages, and record changes
here.
Special Configurations
When the accompanying product has been configured for user-specific application(s), supplemental pages
will be inserted at the front of the publication binder. Remove the indicated page(s) and replace it (them)
with the furnished Special Configuration supplemental page(s).
Configuration Data