Instruction manual

AXIS 2400+/2401+ Admin Manual Configuring the Video Server

Configuring the Video Server

After deciding on the application you wish to develop and having installed your AXIS

2400+/2401+, the unit is now connected directly to a local area network.

This section describes how to configure the AXIS 2400+/2401+ and is intended specifically

for product Administrators – who normally have high-level privileges denied to ordinary

users.

The AXIS 2400+/2401+ is configured from a standard browser (Netscape Navigator 4.x or

Microsoft Internet Explorer 4.x/5.x), by using the Administration Tools.

Important!

The Administration Tools

The Web-based Administration tools are displayed in an intuitive graphical user interface

that allows simple point-and-click system configuration. How to access and use the tools is

explained in the following pages.

Tip! On-line help is available on every page of the AXIS 2400+/2401+Web interface.

This information is of particular relevance when configuring the unit and should be used as a

first point of reference for resolving any administration queries. The help system is stored

internally in the unit.

Accessing the Tools

Follow the instructions below to access the Administration Tools from a browser:

1. Start the browser and enter the name or IP address of the AXIS 2400+/2401+ in the

location/address field.

Example!

2. The Application page is now displayed. Click the Admin button to display the

Administration Overview page and the Administration Tools.

To access the AXIS 2400+/2401+ configuration pages, you must first set the IP address, as described in

Installing on a Network, on page 9.

http://172.21.1.200/