Instruction manual

Hardware Inventory AXIS 2400+/2401+ Admin Manual
8
AXIS 2400+/2401+ Rear Panel
Hardware Inventory
Check the items supplied with your AXIS 2400+/2401+ against the following list:
Note: The power supply for your AXIS 2400+/2401+ is country-specific. Please check that the type
you are using is correct.
Item Title/Variants Quantity Item Title/Variants Quantity
Video Server AXIS 2400+
AXIS 2401+ (NTSC)
AXIS 2401+ (PAL)
1 Power Supply
(PS-D)
Europe
UK
Australia
USA
Japan
1
Warranty Docu-
ment
1
Disk Media AXIS Network
Product CD v1.2 (or later)
1 This docu-
ment
AXIS 2400+/01+
Administration
Manual v1.0
1
Power Supply Connector
A single Jack socket (PS-D) for
connection of the AXIS
2400+/2401+ power supply. The
terminal block connector provides
an auxiliary connection point for
AC or DC power to the unit.
Network Connector
The AXIS 2400+/2401+ is designed for 10 Mbps Ethernet
and 100 Mbps Fast Ethernet networks and connects to the
network via a standard RJ45 connector. Supporting NWAY,
the AXIS 2400+/2401+ detects the speed of the local net-
work segment and varies the speed of data communication
accordingly (between 10 Mbps and 100 Mbps).
I/O Terminal Block
The I/O Terminal Block connector is located between the two serial ports on the
rear panel and provides the physical interface to one relay switch output, four
digital photo-coupled inputs, and an RS-485 interface. Use this connector for
transmitting data over multi-drop communication lines, RS-485 Pan Tilt devices,
and external triggering - typically associated with CCTV equipment. The connector
can be utilized as an alternative connection point for DC supply to the unit.
RS-232 Serial Connectors
Two 9-pin D-sub connectors providing RS-232 serial
connection. Typically used for Pan/Tilt device interface.
COM1 is multiplexed with the RS-485 port via the Ter-
minal Block Connector. COM2 can also be used for con-
necting a modem or the AXIS 2191 Audio Module.
POWER
PS-D
COM 1
COM 2
ETHERNET
10/100
1 2 3 4 5 6 7 8
9 10111213141516