User Guide

 Locate Axis video products on the network
 Set IP addresses
 Configure single or multiple units
 Show status of local and remote video
devices
 Upgrade firmware of multiple units
sequentially or in parallel
 Use standard Internet protocols
AXIS Camera Management
In any installation, with few or many Axis video products, the
AXIS Camera Management offers powerful and efficient installation
and management capabilities.
With this software installed on your Windows PC you can
automatically locate multiple Axis video products on the local
network using standard network protocols. Furthermore, you can
set the IP addresses, configure, show connection status and manage
firmware upgrades of multiple Axis video products sequentially or
in parallel. Remote video devices with known IP addresses can also
be managed.
For simplified overview, the video devices can be grouped into user
defined groups and subgroups such as Building A - Second floor,
etc. When new Axis video products are added to the network, or if
status changes e.g. connection lost, the video devices are placed in
pre-defined groups for easy handling. Video devices may easily be
re-grouped, making it possible to view and manage your specific
surveillance installation efficiently. The AXIS Camera Management
allows secure ways to connect to Axis video products using HTTPS
encryption.
This flexible management software simplifies management of your
Axis video products over the network.
Efficient management tool for your
Axis network video products