User Guide
48
AXIS 242S IV - System options
Resetting to the factory default settings
To reset the AXIS 242S IV to the original default settings, go to the System Options >
Maintenance web page (described in
Maintenance, on page 46) or use the control button
on the front panel, as described below.
Note that although a loaded IV module is always saved during a reset to the factory default
settings, all of its values will be returned to their default settings.
Control Button
Status Indicator
Using the Control Button
Follow the instructions below to reset the AXIS 242S IV to the factory default settings
using the Control Button.
1. Switch off the AXIS 242S IV by disconnecting power.
2. Press and hold the Control Button while reconnecting power.
3. Keep the Control button pressed until the Status Indicator displays yellow (this
may take up to 15 seconds).
4. Release the Control Button.
5. When the Status Indicator changes to Green (which may take up to 1 minute), the
process is complete and the AXIS 242S IV will have been reset.
6. Reinstall the AXIS 242S IV, as described in the Installation Guide.