User`s manual

Connecting to a Network AXIS 2490 User’s Manual
14
Verifying the Connection From Your Browser...
Having completed the procedure above, you should then verify the connection between the
AXIS 2490 and the network, as follows:
1. Start your browser (see note below) and enter the IP address of the AXIS 2490 in the
Location/Address field:
The Welcome Page for your AXIS 2490 is now displayed:
2. Continue the setup process and configure your own application using the Installation
Wizard or click the Admin Button and use the Administration Tools, as described in
Configuring Your Serial Server, on page 18.
Important!
http://172.21.1.200/
The Administration Tools can be used to change your username and password. Log on as an Administra-
tor using the username root
and default password pass. It is recommended that you change the root
password, since all Axis products are shipped with the same password as default. For further informa-
tion, refer to System Security, on page 22.
Admin
Button
Installation
Wizard