User Guide

AXIS 2490 User’s Manual Product Description
7
Product Description
Read the following information to familiarize yourself with the AXIS 2490, making
particular note of where the connectors and indicators are located.
Two RS-232 serial ports, 9-pin male
D-SUB. Both ports support: RX, TX, RTS,
CTS, DSR, DTR, RI and CD.
Serial Number
Located on the underside label of the AXIS
2490, the serial number is identical to the
Ethernet address of the unit.
Front Panel
Control Button
Used to reset the unit and to reinstate the
factory settings.
Screw Connector Block
One RS-485/RS-422 serial port on screw terminal block.
The block connector also provides an auxiliary connection
point for AC or DC power to the unit.
Network Connector
The AXIS 2490 is designed for 10 Mbps Ethernet and 100 Mbps
Fast Ethernet networks and connects to the network via a
twisted pair category 5 cable (10baseT and 100baseTX) termi-
nated using a standard RJ-45 connector. Supporting NWAY, the
AXIS 2490 detects the speed of the local network segment and
varies the speed of data communication accordingly, between
10 Mbps and 100 Mbps.
Power Supply Connector
A single Jack socket (PS-B) for
connection of AXIS 2490 power
supply.
Rear Panel
Status
Indicator
Power
Indicator