User Guide
Table Of Contents
- Cover
- Quick Installation Procedure
- Notices
- Table of Contents
- Product Overview
- Physical Description
- Installation
- Configuring the Video Server
- Using the Video Server
- Accessing your Surveillance Images
- Positional Control of the Video Sources
- The Log File
- PINGing Your IP Address
- Symptoms, Possible Causes and Remedial Actions
- Obtaining Updated Software
- Upgrading the Software
- The Physical Connector
- Camera Positioning
- CGI Parameters for Image Requests
- CGI Parameters for Pan Tilt and Zoom Control
- CGI Parameters for Preset Positions
- CGI Parameters for Serial Port Control
- Controlling and Monitoring
- Wizard Preconfigurations
- Client Applications
- Starting and Enabling the Editor
- Programming Script Format
- Commands
- Index
Physical Description
AXIS 2400/2401 Administration Manual
8
Physical Description
Read the following information to familiarize yourself with the AXIS 2400/2401, making
particular note of where the connectors and indicators are located. This information provides a
useful reference during the installation of the product into your networking environment.
The Front Panel
Video Inputs -
The AXIS 2401 allows a single video source to be connected via the
VIDEO IN
connector; the AXIS 2400 accommodates up to 4 separate video sources (
VIDEO 1
-
VIDEO 4
)
simultaneously.
Each supported video input is terminated using a coax/BNC connector. Physical connections made
using RG59, 75 ohm coax video cable; have a recommended maximum length of 800 feet (250
meters).
Video Output (AXIS 2401 only) -
A single video output (
VIDEO OUT
) terminated with a
coax/BNC connector allows direct connection of an external monitor.
http://www.axis.com
AXIS 2400 Video Server
STATUS
NETWORK
POWER
VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4
75 ON
1 2 3 4
AXIS 2400 Front Panel
AXIS 2401 Front Panel