User Guide

Using the Video Server
AXIS 2400/2401 Administration Manual
34
Using the Video Server
This section is specifically targeted at system Users; that is, personnel responsible for using the
AXIS 2400/2401 as part of an integrated surveillance system.
Important!
Accessing your Surveillance Images
The AXIS 2400/2401 can be used with most operating systems; including: Windows 95/98 and
NT; as well as Linux, UNIX, Mac, and several others. You access the AXIS 2400/2401 from any
standard Web browser; such as, Netscape Navigator 4.x or Internet Explorer 4.x (see the Important
notice, below).
Follow the instructions below to access your surveillance images:
1. Start your Web browser application
2. Enter the name or IP address of the AXIS 2400/2401 into the Location/Address field (URL)
of your Web browser:
Example
A video image, similar to one of the examples featured on page 35, is now displayed within your
Web browser.
Note:
When accessing the AXIS 2400/2401 for the first time using Microsoft Internet Explorer, you
must then temporarily lower your security settings to perform a one-time-only installation of
Axis' ActiveX component onto your workstation, as described on page 17.
Your system Administrator(s) has installed the AXIS 2400/2401 to your computer network, con-
nected several surveillance video cameras to the unit, and tailored the user functions and general
look and feel of the system to specifically meet your surveillance needs; consequently, many of the
functions and examples provided within the section can vary from those displayed in your system.
Any deficiencies or shortcomings within your application should be escalated to the system Adminis-
trator(s) who has with high-level privileges normally denied to ordinary users.
On-line help may not be available from the user interface, as your access to this information
may be denied by your system Administrator.
http://172.21.1.200/