User Guide

29
AXIS 282/AXIS 282A - Audio (AXIS 282A only)
Audio (AXIS 282A only)
The AXIS 282A can transmit audio to other clients using an external microphone and can
play audio received from other clients by attaching a speaker. The Setup page for the AXIS
282A has an additional menu item called Audio, that allows different audio configurations
to be set up, e.g. full duplex, half duplex and simplex.
Note: The speaker attached to the audio output of the AXIS 282A must have a built-in
amplifier, e.g. some PC speakers.
Audio Settings
This section describes how to configure the basic audio settings for the AXIS 282A, e.g. set
the communication mode and adjust the sound levels in the microphone and speaker
connected to the camera.
Enable Audio
Check the box Enable Audio to enable audio functionality.
Audio Channels
There are two mono audio channels between the AXIS 282A and other clients, one for
receiving audio and one for transmitting audio. Each audio channel can be turned on or
off, which means that there are four audio mode options that can be used.