FRANCAIS Installation Guide ENGLISH Drop Ceiling Mount DEUTSCH ESPAÑOL ITALIANO 日本語
Drop Ceiling Mount Installation Guide This installation guide provides instructions for installing the Drop Ceiling Mount for the AXIS 225FD Fixed Dome Network Camera. Read the entire guide before attempting installation. For all other aspects of using the camera, please see the User’s Manual, available from www.axis.com or in the Axis Installation CD.
Drop Ceiling Mount Installation Guide Follow these instructions to install drop ceiling mount: 1. Locate the position in the ceiling for a 220mm hole to be cut. A template is included to aid in cutting the mounting hole. Remove protective paper, fix to ceiling and cut around template. Note: Check that the ceiling material is sturdy enough to hold the gross weight of the camera and the Drop Ceiling Mount. The thickness of the ceiling should be between 5 and 40mm. 2. Insert the ceiling bracket into hole.
Drop Ceiling Mount Installation Guide 4. Tighten the fixed screws from the bottom to secure the bracket to the ceiling. Fixed screws ENGLISH Note: Tightening the fixed screws too hard may cause damage to the ceiling or ceiling bracket. 5. Remove the dome casing from the unit casing. Refer to the AXIS 225FD Installation Guide. Note: Be careful not to damage the dome or scratch the glass. Unit casing Dome casing 4 Mounting screws 6.
Drop Ceiling Mount Installation Guide 8. Attach the cover plate to the bracket using the two tamper-proof screws and supplied allen key.
Guide d’installation du montage sur faux-plafonds Ce guide d’installation vous explique comment installer le montage pour faux-plafonds de la Caméra réseau à dôme fixe AXIS 225FD . Lisez ce guide dans son intégralité avant de procéder à l’installation. Pour d’autres informations sur l’utilisation de la caméra, consultez le Manuel de l’utilisateur disponible sur le CD d’installation ou surfez sur www.axis.com.
Guide d’installation du montage sur faux-plafonds Suivez ces instructions pour le montage sur faux-plafonds : 1. Localisez le point de perforation d’un trou de 220 mm dans le plafond. Un gabarit est joint pour faciliter la découpe du trou de montage. Retirez le papier de protection, fixez le gabarit au plafond et découpez tout autour. Remarque : Vérifiez que le plafond est assez résistant pour supporter le poids brut de la caméra et du montage pour faux-plafond.
Guide d’installation du montage sur faux-plafonds 4. Serrez les vis fixes à partir du bas pour fixer le support au plafond. Vis fixes 5. Retirez le boîtier du dôme du boîtier de l’appareil. Reportez-vous au Guide d’installation de l’AXIS 225FD. Remarque : Veillez à ne pas endommager le dôme ni à rayer la vitre. Boîtier de l’appareil Boîtier du dôme 4 Vis de montage 6. Fixez le boîtier de l’appareil au support du plafond à l’aide des trois vis de montage. 7.
Guide d’installation du montage sur faux-plafonds 8. À l’aide des deux vis inviolables et de la clé Allen fournie, fixez la plaque couvercle au support.
Installationsanleitung für Deckenhalterung Diese Anleitung enthält Anweisungen zum Installieren der Deckenhalterung für die Netzwerkkamera für Festinstallation mit Kuppelhaube, AXIS 225FD. Lesen Sie die komplette Anleitung, bevor Sie mit der Installation beginnen. Alle anderen Aspekte der Nutzung dieser Kamera werden im Benutzerhandbuch beschrieben, das sich auf der mitgelieferten Axis Installations-CD befindet. Sie können das Benutzerhandbuch auch von unserer Website www.axis.com herunterladen.
Installationsanleitung für Deckenhalterung So installieren Sie die Deckenhalterung: 1. Bestimmen Sie die Position an der Decke, wo eine Öffnung mit 220 mm Durchmesser entstehen soll. Eine im Lieferumfang enthaltene Vorlage erleichtert Ihnen das Ausschneiden der Öffnung. Entfernen Sie das Schutzpapier der Vorlage, und bringen Sie sie an der Decke an. Schneiden Sie um die Vorlage herum die Öffnung aus.
Installationsanleitung für Deckenhalterung 4. Ziehen Sie die befestigten Schrauben von unten fest, um die Deckenhalterung fest an der Decke anzubringen. Befestigte Schrauben DEUTSCH Hinweis: Wenn Sie die Schrauben zu fest anziehen, kann dadurch die Decke oder die Deckenhalterung beschädigt werden. Hinweis: Achten Sie darauf, dass die Kuppelhaube nicht beschädigt wird und das Glas keine Kratzer bekommt. Kameragehäuse Kuppelhaube 4 Montageschrauben 6.
Installationsanleitung für Deckenhalterung 8. Befestigen Sie die Abdeckung an der Deckenhalterung. Verwenden Sie hierfür die zwei zugriffssicheren Schrauben und den beigefügten Schraubenschlüssel.
Guía de instalación del soporte para falso techo Esta guía de instalación contiene las instrucciones para instalar el soporte para el montaje en falso techo de la AXIS 225FD Cámara de red con burbuja fija. Antes de comenzar la instalación, le rogamos que lea la guía por completo. Para obtener información sobre la utilización de la cámara, consulte el Manual del usuario, disponible en www.axis.com o en el CD de instalación Axis.
Guía de instalación de soporte para falso techo Siga las siguientes instrucciones para instalar el soporte para falso techo: 1. Ubique en el techo el lugar en el que perforará un agujero de 220 mm. Se incluye una plantilla para ayudarle a cortar el agujero de montaje. Retire el papel protector, fíjelo al techo y corte alrededor de la plantilla. Nota: Compruebe que el material del techo es lo bastante sólido como para soportar el peso bruto de la cámara y del soporte para falso techo.
Guía de instalación del soporte para falso techo 4. Apriete los tornillos fijos desde la base para fijar el soporte al techo. Tornillos fijos ESPAÑOL Nota: Si los aprieta demasiado, podría dañar el techo o el soporte para techo. 5. Retire la carcasa de la burbuja de la carcasa de la unidad. Consulte la Guía de instalación de la AXIS 225FD. Nota: Procure no dañar la burbuja ni rayar el cristal. ESPAÑOL Carcasa de la unidad Carcasa de la burbuja 4 Tornillos de montaje 6.
Guía de instalación de soporte para falso techo 8. Fije la placa de la cubierta en el soporte mediante los dos tornillos de alta resistencia y la llave Allen que se incluye.
Guida all'installazione per il montaggio a controsoffitto Nella presente guida all'installazione vengono fornite le istruzioni per il montaggio a controsoffitto della videocamera di rete a cupola fissa AXIS 225FD. Leggere l'intera guida prima di iniziare l'installazione. Per qualsiasi altro aspetto relativo all'utilizzo della videocamera, vedere il Manuale per l'utente, disponibile sul sito Web di Axis all'indirizzo www.axis.com oppure nel CD di installazione di Axis.
Guida all'installazione per il montaggio a Per il montaggio a controsoffitto seguire le istruzioni riportate di seguito. 1. Individuare la zona del soffitto dove praticare il foro di 220 mm. È possibile utilizzare il modello di foratura fornito. Rimuovere la pellicola di protezione e praticare il foro applicando il modello al soffitto. Nota: Verificare che il materiale del soffitto sia abbastanza solido per sostenere il peso della videocamera e del controsoffitto.
Guida all'installazione per il montaggio a controsoffitto 4. Fissare la staffa al soffitto stringendo le viti a partire dal basso. Viti fisse Italiano Nota: Se le viti fisse vengono strette eccessivamente possono verificarsi danni al soffitto o alla staffa. 5. Rimuovere la cupola dall'alloggiamento dell'unità. Vedere la Guida all'installazione di AXIS 225FD. Nota: Fare attenzione a non danneggiare la cupola o graffiare il vetro. ITALIANO Alloggiamento unità Cupola 4 Viti di montaggio 6.
Guida all'installazione per il montaggio a 8. Fissare la piastra di copertura alla staffa utilizzando le due viti antimanomissione e la chiave a brugola fornita.
天井取 り 付け用ブ ラ ケ ッ ト イ ン ス ト ールガ イ ド こ の イ ン ス ト ールガ イ ド は、 AXIS 225FD を天井に埋め込んで設置す る ための専用ブ ラ ケ ッ ト の使用方法に ついて説明 し てい ます。 AXIS 225FD の使用方法については、 ユーザーズマニ ュ アルを参照 し て く だ さ い。 ユーザーズマニ ュ アルは、 AXIS 225FD に付属の CD に収録 さ れてい ます。 ま た、 Axis のホームページか ら ダ ウ ン ロ ー ド す る こ と がで き ます。 パ ッ ケージの内容 • ブ ラ ケ ッ ト 本体 • ブ ラ ケ ッ ト イ ン ス ト ールガ イ ド (本書) • テ ンプ レー ト • ネジ (3 つ) • い じ り 止めネジ (2 つ) • 専用レ ンチ (1 つ) 52 13 13 70 • カバープ レー ト 55 02 日本語 仕様 重量 : 850g 寸法 : 上記の図を参照 対応天井厚 : 5 ~ 40mm 取 り 付け穴径 : 220mm (最大 230mm)
天井取 り 付け用ブ ラ ケ ッ ト イ ン ス ト ールガ イ ド ブ ラ ケ ッ ト 取 り 付け手順 1. 天井穴 (220mm) を開け る 位置を決定 し ます。 付属のテ ン プ レー ト の保護シールを剥が し 、 穴を開け る 位置に貼 り 付け ます。 テ ンプ レー ト に沿っ て穴を開け ます。 注意 : 天井の素材が、 AXIS 225FD と ブ ラ ケ ッ ト を合わせた重量に耐え ら れる こ と を事前に確認 し て く だ さ い。 取 り 付けが可能な天井厚は、 5 ~ 40mm です。 参考 : AXIS 225FD 本体の重 さ は 1250g (電源アダプ タ を除 く )、 ブ ラ ケ ッ ト の重 さ は 850g です。 2. サポー ト アーム をブ ラ ケ ッ ト 内に押 し 込んだ状態でブ ラ ケ ッ ト を天井穴に埋め込みます。 サポー ト アーム ブラケ ッ ト 3.
天井取 り 付け用ブ ラ ケ ッ ト イ ン ス ト ールガ イ ド 4. ブ ラ ケ ッ ト の下部にあ る 固定ネジ を締めて、 ブ ラ ケ ッ ト を天井に固定 し ます。 固定ネジ 注意 : 固定ネ ジは強 く 締めすぎ ない よ う に し て く だ さ い。 天井ま たはブ ラ ケ ッ ト 本体を損傷す る こ と があ り ま す。 5. ド ーム ケーシ ン グ をユニ ッ ト ケーシ ン グか ら 取 り 外 し ます。 詳 し く は、 AXIS 225FD ユーザーズマニ ュ ア ルを参照 し て く だ さ い。 注意 : ド ーム本体やガ ラ ス部を損傷 し ないよ う 注意 し て取 り 外 し を行っ て く だ さ い。 ユニ ッ ト ケーシ ング 4 固定ネジ 6. ユニ ッ ト ケーシ ン グ をブ ラ ケ ッ ト に差 し 込んで、 固定ネジ (3 箇所) を締め ます。 7.
天井取 り 付け用ブ ラ ケ ッ ト イ ン ス ト ールガ イ ド 8.
Drop Ceiling Mount Installation Guide v2.0 February 2006 Copyright © Axis Communications AB, 2005-2006 Part No.