User`s manual

15
AXIS Media Control - AMC Control Panel
AMC Control Panel
The AMC Control Panel is used to configure AMC. The figure below, the General tab, shows the different parts of AMC that
can be configured such as Audio, Network and PTZ. The sections below describe each of these AMC tabs and how to configure
AMC.
Open the AMC Control Panel by clicking Start > Set
tings > Control Panel > Axis Media Control or by right clicking in the
video window. Depending on which camera you are using, you will have either some or all of the following tabs shown in the
figure below.
Note: If you are using a simpler Axis camera, not all of the tabs shown below will be visible. If you then log into a camera with greater
functionality, the necessary software will also be installed for use with that camera. If you later go back to the simpler camera, while not
usable, the additional tabs will still be visible
.