User`s manual

26
AXIS Media Control - PTZ Tab
Configure Buttons - Click on Configure Buttons to bring up the Configure Button Menu. Your Axis joystick has 12 buttons
that can each be programmed to perform one of several different functions. See Joystick button configuration below for more
information.
Mouse Settings
Use this setting to adjust the zoom speed when scrolling with the mouse wheel.
Miscellaneous
Set AMC to start in either Emulated Joystick Mode or Center Mode.
The default setting for PTZ is the Center Mode. When in Center
Mode, click on any part of the image other than its exact
center and the camera will move so that the point you clicked on becomes the new center of the image.
If you select Emulate Joystick Mode, the camera moves in
the direction of the mouse pointer. If you click and hold down on
the left mouse button, and then point your cursor at the lower left hand corner of the image, the camera continues to move
left and down until you release the mouse button.
Select En
able PTZ Overlays to show the graphical overlays that normally appear in the image when viewing your camera on
the Live View Web page. PTZ Overlays will only be visible when Enable Overlays is selected in the MPEG-4/H264 tab. See
MPEG-4 Tab, on page 2
3 and H.264 Tab, on page 24.