Installation guide

AXIS T92A00 Installation Guide Page 3
ENGLISH
AXIS T92A00 Housing
Follow these instructions to complete the installation of AXIS T92A00 and Axis network camera:
Warning! High voltage - the electrical connection should be made by an authorized electrician.
Please observe relevant national and local regulations for the installation.
Axis Network Cameras
The following camera models are supported:
Note:
Before you begin, make sure that the AXIS T92A00 package contents, power supply, and the
required cables, tools, and documentation are available. See “Package contents” on page 4.
1. “Package contents” on page 4
2. “Install the bracket” on page 5
3. “Install the camera in the housing” on page 6
4. “Connect the power cable to the camera” on page 7
5. “Route the cables to the housing” on page 8
6. “Connect the power cable to the housing 100-240V AC power cable to
AXIS T92A00” on page 9
7. “Complete the installation” on page 9
Camera Model: Comment:
• AXIS P1311
•AXIS Q1755
•AXIS 210
• AXIS 210A
•AXIS 211
• AXIS 211A
• AXIS 211M
• AXIS 211W external antenna required, see www.axis.com
•AXIS 221
• AXIS 223M