Installation guide

Page 4 AXIS T92A00 Installation Guide

Package contents

Bag 1:

3 rectangular spacers

2 small cable glands

1 large cable gland

1 allen key

Bag 2:

1 large hexagonal screw nut

2 small hexagonal screw nuts

2 hex head cap screws

2 Phillips screws

2washers

1 clear plastic spacer

Bag 3

1 large black washer

2 small black washers

3 flathead screws (3 different lengths)

AXIS T92A00

AXIS T92A00 Power supply

cable (red/black)

Note that the AXIS T92A00 Power supply is pre-installed.

Note that the cable is pre-installed.

Axis Network Camera*

AXIS P1311, AXIS Q1755, AXIS 210/ 210A, AXIS 211/211A/211M/211W, AXIS 221, AXIS 223M

Printed installation guide Instructions on how to install the camera on the network

Bracket, cables and connector (not included)

1 wall bracket* See www.axis.com for available brackets and accessories.

1 mains power cable 100-240V AC power cable

1 network cable Shielded Twisted Pair (STP) cable recommended.

If using a bracket with an external cable channel, the RJ45

connector is attached after the cable has been pulled through

the cable gland

1 RJ45 connector

Tools (not included)

1 Phillips screw driver

1 flathead screw driver

1 small (2mm) flathead screw driver

1 RJ45 crimp tool See note on RJ 45 connector above

* Sold separately or included in kit, see Accessories product list at www.axis.com for details