User`s guide

Setup for Macintosh AXIS 5400/AXIS 5600 User’s Guide

Setting the IP address

Follow the step-by-step procedure below to set the IP address, enabling access to the

AXIS 5400/AXIS 5600 via any standard Web browser:

1. Open the Chooser and select a network printer driver, any LaserWriter will do.

2. Select the Axis printer port which name ends with "_CFG" and close the

Chooser.

3. Open a text editor, e.g. SimpleText and write a text file containing the following:

INT_ADDR: <IP address>

Example:

4. Print the above text file. The settings will be stored in the print server.

5. Open the Chooser and select the printer port you wish to use for printing

documents. Close the Chooser.

Note:

INT_ADDR: 171.16.2.143

The _CFG port disappears 60 minutes after the AXIS 5400/AXIS 5600 has been powered on. If

you want it to reappear, you must restart the AXIS 5400/AXIS 5600.

Macintosh