Service manual

26
two separate displays. Press the number “4” on the
keypad and display will show “Price Display”. Press
the “” Key and display will show “Price Display: On
(Off). Press “” - turn Off (On). Press the “” Key
to toggle or press the “CLR” key to exit without
making changes and return to “PRICE DISPLAY”.
Press “CLR” to return to “SETUP MODE 2”.
STORAGE TEMP ENABLE/DISABLE –
Press key “5”
Press key 5 and display will show current state
“Storage Temp Enable (Disable). Press “” Key
and display will show “Storage Temp On (Off).
Press “” - turn Off (On). Press the  Key to toggle
or press the “CLR” key to exit without making
changes and return to “STORAGE TEMP
ENABLE/DISABLE”. Press “CLR” to return to
“SETUP MODE 2”.
INTERVAL CLEARING – Press key “6”
This function is used to indicate the state of the
interval clearing setting. Press the number “6” key
and “INTERVAL CLEARING” will show on display.
Press the * Key and display will show Interval Clear:
Off (On). Press  - turn On (Off). When turned
“ON”, the interval (resettable) data will automatically
be cleared upon successful completion of a DEX
audit. When turned “OFF” it allows for remote
auditing devices that clear resettable data manually
to be used to clear the data. Press the  Key to
toggle or press the “CLR” key to return to
“INTERVAL CLEARING”. Press “CLR” to return to
“SETUP MODE 2”.
SET LIGHTS OFF – Press key “7”
The function is used to turn on the “SET LIGHTS
OFF TIME” set in “SETUP MODE 1”. Press the
number “7” key and “SET LIGHTS OFF” will show on
display. Press the “” Key and display will show
“Lights Off: Off (On). Press “” - turn On (Off).
Press the * Key to toggle or press “CLR” to return to
“SET LIGHTS OFF”. Press “CLR” to return to
“SETUP MODE 2”.
DOUBLE TALK – Press key “8”
The function is used to turn on or turn off the
“Double Talk” feature. Press the number “8” key and
“Double Talk” will show on display. Press the “”
Key and display will show current state “On” or “Off”.
Press “” to toggle from On to Off. With the display
showing the state you wish the mode to be in, press
the “CLR” key to return to “Double Talk”. Press
“CLR” to return to “SETUP MODE 2”.
SET STORAGE TIME – Press key “9” ”
This function is used set the Time, Date, and Day
when Storage Temperature will be ON. Press the
number “9” and “SET STORAGE TIME” will show
across display. Set Storage Time can be set in the
same manner as “SET NOT AVAIL TIME” covered in
the Initial Programming Section of this manual.
SET STORAGE TEMP – Press key “0” ”
This function is used to set Storage Temperature.
Press the number “0” key and “SET STORAGE
TEMP” will show on display. Set Storage Temp can
be set in the same manner as “SET
TEMPERATURE” covered in “SERVICE MODE”
section of this manual.
SATELLITE (MULTIMATE) MODE
Enter SATELLITE MODE by opening the main door
and pushing the Service button five times. The
display will read “SATELLITE MODE”.
NEXT ITEM - Press key “A”
NOT USED - Press key “B”
Set SAT PRICE – Press key “C”
This function is used to assign the regular and
secondary prices for all selections in the Satellite
(MultiMate) machine. Secondary prices are only
active when the vender is in the Happy Hour mode
(Mode 3-2). To access this mode, press the Service
Switch 5 times, then press C on the selection
keypad the display will show “Set Sat Price”. Press
the
“” key the display will show “1 = Regular
Pricing” in the top line and “2 = Secondary Pricing” in
the second line. Use the selection keypad to enter
which set of prices you want to change.
Note: The following steps are the same for both
“Regular Pricing” and “Secondary Pricing.” The
following steps assume you are setting the
“Regular Pricing.” Then follow one of the
procedures below to set prices.
All Selections
Upon pressing the 1 key the display will show
“Regular $XX.XX”. Enter the desired price using
the selection keypad the display will change to “PR
$XX.XX” with XX.XX being the price you just
entered. Press the
“” key a > will appear under
Satellite Service Modes
To access these modes press the Service
Switch on the BevMax 5 times then press
the corresponding letter or number.
C - Set SAT Price
D – SAT En Combo Discnts
E – Number Cmbo Discnts
1 – Golden-Eye Policy
2 – Set Golden-Eye SEL
3 – Check Motor Scan
4 – Set Credit Return TO (time out)