Service manual

68
XY MOTOR PICKER UNIT
ITEM PART DESCRIPTION DN5800-4
1 XY Delivery System CR0002183
2 Assembly Cover Y Belt CR0001797
3 Y Motor Cover Top 801,823,29x.x1
4 X Motor Cover Bottom 801,823,28x.x1
5 X Bottom Belt Cover (Ramp) CR0002585
6 Harness, X Motor – bottom, not shown 804,928,25x.x1
7 X Top Carriage Assembly (top of XY) CR0002121
8 X Axis Mounting Assembly Top CR0002133
9 XY Extrusion (track) 801,201,88x.x1
10 Harness, XY E Chain (Top horizontal) – not shown 804,928,26x.x1
11 Harness, Y E Chain (vertical) 804,924,79x.x1
12 XY Belt Idler Tensioning Assembly (top left) 647,079,70x.x3
13 Motor XY System (Large D shaft) 804,501,84x.x1
14 Idler Pulley and Bracket Assembly 647,081,60x.x3
15 X Top Idler Pulley Assembly 647,081,10x.x3
16 Belt Clamp 805,100,03x.x1
17 X Drive Tensioner Assembly 647,084,70x.x3
18A Oilite Bushing 805,300,73x.x1
18B Tension Spring 801,701,71x.x1
18C Pulley, 32 tooth “D” Drive 805,300,66x.x1
19 X Motor Bracket Assembly 647,084,60x.x3
X Motor Bracket Cover 647,071,48x.x3
20 X Axis Belt (22’) 647,075,30x.x3
21 X Bottom Carriage Assembly (bottom of XY) 647,082,40x.x3
22 Assembly X Axis Drive, Bottom (Wide) 647,079,30x.x3
23 Assembly Y Axis CR0002127
24 Y Carriage Assembly Part of #22
25 Y Axis Belt (11.25’) 657,002,00x.x3
26 Screw Hex ¼ - 28 800,202,84x.x1
Spacer, .257” 805,300,71x.x1
Hex Nut, ¼ - 28 CR0004998
27 Micro Switch with Straight Arm (X Home) 804,101,31x.x1
28 Y Board 804,925,32x.x1
29 Y Extrusion Part of #22
30 Pulley Roller 805,300,54x.x1
31 XY Shipping Bracket 647,071,06x.x3
32 Screw, Wing ¼ - 20 x 1 ¼ molded nylon (for shipping bracket) 800,305,29x.x1
33
34
Part numbers & descriptions are subject to change with out notice.
NA = Not applicable TBD = To be determined RB = Replaced by