User`s manual

AXIS 570/670 User’s Manual Section 3: Basic Installation
33
Windows
IBM Mainframe
IBM AS/400
UNIX
NetWare
OS/2
Macintosh
The AXIS NetPilot Installation Wizard guides you through the
installation process. The following options are available:
Note: ❏ The number of options varies according to the number of
environments you enable.
Print Server Name The default print server name consists of the characters ‘AXIS’
followed by the last six digits of the serial number. If you want to
change the print server name, just type the new name in the available
text field.
Environments Choose which networking environments you want to configure the
AXIS 570/670 for, i.e. SNA, NetWare, TCP/IP, Windows & OS/2 or
AppleTalk. If your network comprises various different platforms, you
can enable any combination of environments.
Note: ❏ AppleTalk only available for the AXIS 570 and the AXIS 570e
models.
SNA Select the emulation mode for the AXIS 570/670. The supported
modes are 3174 (Mainframe) and 5494 (AS/400). You should also
provide the valid emulation settings.
NetWare NDS Place NetWare Print Queues on a specific bindery server, or
alternatively into an NDS Tree.
The IP address Choose the method the AXIS 570/670 should employ for obtaining
an IP address. DHCP, ARP, RARP and BOOTP are supported. You
can also select to set the IP address manually. Refer to Assigning an IP
address, on page 36 for further information about setting the IP
address.