User`s manual

Section 4: Setting Up - AS/400 AXIS 570/670 User’s Manual
66
IBM AS/400
Verifying the
communication link
1. Type WRKCFGSTS *DEV xxxx*, where xxxx are the first
four characters of the printer device name, on the AS/400
command line. A list of printer devices will be displayed. Make
sure that a virtual printer device is active.
2. Direct a printout to this printer device to check the integrity of
the communication link.
Raw TCP/IP Printing - SCS data streams
The configuration procedures presented in this section are divided
into three separate steps:
• Configuring of the AS/400 host
• Configuring the AXIS 570/670
• Verifying the communication between the AXIS 570/670 and the
AS/400
Notes: ❏ When printing SCS data using Raw TCP/IP, the AS/400 printer
file settings will not be sent to the AXIS 570/670. If you want to
retain a specific document style, font or orientation, the data must
be embedded in the document.
Before you begin Make sure that the AS/400 host is running OS/400 V3R6 or higher
with TCP/IP support installed and configured.