User`s manual

Adding Printers in NetWare
50 AXIS 5400+ / AXIS 5600+ User’s Manual
9. You will find the print server in the next window with the printer attached
on the connected port. Depending on the transport protocol you used when
you start the installation, the print server should appear as following:
• TCP/IP Network protocol:
IP Address and Port, e.g: 192.168.70.243 and LPT1
Only the ports with a connected printer show up in this window. If
the printer is not in the displayed print list, click Manually specify
the print server and do the following: Enter the print server’s IP
address in the IP Address field and choose a port in the Print server
port field:
e.g., 192.168.70.243 and LPT1
The available ports are:
Ports available Parallel port 1 Parallel port 2 Serial port
AXIS 5400+ LPT1 — —
AXIS 5600+ LPT1 LPT2 COM1