User manual

User Manual - 10
3 Unit performance
Cameras
Use the numeric buttons [from 1 to 16] to select a single camera, using [Zoom-in ] you could
change to quad view 2x2 , or a 9 camera view (3x3) or 16 (4x4) depending on the number of AXIS
cameras connected.
Press [Zoom-out ] to change to the previous view.
Press [Page ] to change to the next camera or camera’s group when you are into the quad view
and [Page ] to return back to the previous camera or camera’s group.
Press the [.COM] button to show or hide the camera’s name in the image.
To exit the carousel press any button.
When connecting the unit will display the last view selected.
Dome
When a camera is a dome the AX-TV identifies it displaying the dome icon on the screen.
To active the dome control press the OK button and the icon will change its appearance. Use the
zoom keys [Zoom-in y Zoom-out ] to approach or distance the image, and the arrow
keys to move the camera in any direction. To disable the dome control press OK again.
You can also use the Videotec DCZ joystick and the web/mobile interface to control the
domes.
Web interface
The AX-TV can be used and configured from a web interface. The connection can be established
from a PC, a tablet, a mobile, etc…
You need the following data to connect, there are available in the advanced configuration on the API
configuration section:
 AX-TV IP address (API information)
 HTTP port (API port)
 API user and password (API password)
Enter the IP address and the port eg: 192.168.20.20:8080, a new window is open where you have to
enter the connection user and password; next it will open a window with the AX-TV controls.
This windows works as the AX-TV remote control, you can use it from any mobile device with data
connection.