AX-TV HDMI Wireless video decoder ENGLISH User manual
INDEX 1 2 INSTALLATION AND SET UP .................................................................................................................. 2 SETTINGS ................................................................................................................................................. 3 2.1 CONFIGURATION MENU ............................................................................................................................. 3 3 UNIT PERFORMANCE .................................
1 Installation and set up Ax-Tv is a video decoder to visualize IP Axis cameras. With this unit you could see in your TV all the IP Axis cameras you have installed. Connect the unit to the TV trough the HDMI output and to the IP cameras by a network connection, LAN or WIFI. For the installation of an Ax-Tv unit check the package contents and follow the steps.
2 Settings When the unit starts the screen shows the Visual Tools logo, press the [Menu available options. ] button to show all Note: Use the arrow buttons [< ^ >] to scroll through options, the [OK] button to select an option and the [Exit ] button to come back. To show the virtual keyboards get into a text box and pres [OK]. Select the letter key with the arrow buttons and press [OK] to press it. Press [Exit ] to exit the virtual keyboard.
Network settings You need to configure the network parameters to connect to the cameras. Choose the connection you prefer, Ethernet or WIFI, and make sure that the corresponding checkbox is selected or the communications will not be active. WIFI configuration Menu >> Settings >> Network settings >> WIFI settings Select the WIFI network and enter the corresponding password. When the connection it is correct you will see a connected label under the selected name’s network.
System settings In this section you can change the language and apply the Factory settings, this option returns the Ax-Tv unit to its factory settings. Display settings Into the display position you can adjust on your TV screen through the arrow buttons [< and the image centring. Use this option only if necessary.
3 Unit performance Cameras Use the numeric buttons [from 1 to 16] to select a single camera, using [Zoom-in to quad view: 1, 4, 9 and 16 depending on the Axis cameras connected. Press [Zoom-out ] you could change ] to change to the previous view. Press [Page ] to change to the next camera or camera’s group When you are into the quad view and [Page ] to come back to the previous camera or camera’s group. Press the [.COM] button to show or hide the camera’s name in the image.
Appendix 1: Changing Axis cameras settings The unit Ax-Tv request video to the camera as necessary in each case (resolution, compression, etc..) for optimum operation. Only in case that you deemed necessary modify the cameras operation, you have the option to create profiles to adjust the cameras appearance, resolution, compression and image size. You can create up to four profiles that correspond to the four different views that provide the Ax-Tv.
Appendix 2: Technical specifications MODEL: Ax-Tv Wireless video decoder RESOLUTION: 1280 x 720 COMUNICATION: Ethernet RJ45 10/100M adapter.Built in 802.11 b/g/n WiFi inside. VIDEO OUTPUT: 1 HDMI 1.3 output REMOTE CONTROL Infrared remote control DISPLAY: Cameras one by one or quads 2x2, 3x3 and 4x4 PERFORMANCE Default refresh rate 10 - 12 ips for one camera, 5 – 6 ips for four cameras, 4 – 5 ips for nine cameras and 3 - 4 ips for sixteen cameras, except by changes in the camera video profiles.
User manual - 9
ENGLISH HDMI Wireless video decoder User manual DOCAXTVUM00EN_121212v015