Manual
CONTROL PANELS – DIGITAL FOR CONVECTION OVENS
SWITCHING ON THE OVEN
When the oven is powered on, the control panel will be in standby mode. To access the oven
features, press . The upper display will show the actual temperature of the cooking chamber.
From now on it is possible to proceed with the settings of a manual cooking or with a program.
MANUAL COOKING
To create a cooking program in manual mode, proceed with the setting of the following necessary
values:
- Temperature
- Timer
- Steam (optional)
TEMPERATURE
To set the desired temperature, press : the temperature display will show the set value in
flashing mode.
Afterwards, use buttons or to choose the desired parameters.
Press once again to confirm: the display will now show the actual value of the temperature
inside the cooking chamber.
The values can be set between 86°F (30°C) to 500°F (260°C).
During the cooking, the upper display shows the actual temperature inside the chamber; press
to display the set temperature instead.
is lit up with a red LED when heating is activated, and the heating elements are used.