Manual

STEAM/MOISTURE ADJUSTMENT
Press the key and set the desired steam percentage by means of the encoder knob. Press the
encoder knob to confirm the set value.
You can set a value included between 0 and 10. The table below indicates the corresponding
percentage:
STEAM SELECTOR
During the cooking, press button to manually add steam to the cooking chamber. Keep it
pressed to continue adding steam.
COOKING PROGRAMS
1) Using a recipe already stored in memory: if you wish to use a cooking program that has
previously saved, press and, by means of the encoder knob, you can select the
desired program number.
Press the encoder knob to confirm the choice of the selected program.
Press key to start the oven.
2) New cooking program: if you wish to save the new program
Press button and, using the encoder knob, reach the first flashing number, then press
the same knob to confirm.
Press button : you can now start to enter all information regarding the first cooking
phase (temperature, timer, steam, etc.).
While this data is being entered, the LED will be on next to the first phase During the
entering, (C1).
At the end of the settings for the first phase, press button to move on to the setting of
phase 2.
You can enter all information regarding the second cooking phase (temperature, timer,
steam, etc.).
During the entering of data pertaining to phase 2, the LED light will be on next to the second
phase, (C2).
At the end of the settings for the second phase, press button to move on to the setting
of phase 3.
You can enter all information regarding the third cooking phase (temperature, timer, steam,
etc.).
During the entering of data pertaining to phase 3, the LED light will be on next to the second
phase, (C3).
Value
Steam percentage
Value
Steam percentage
0
0%
6
60%
1
10%
7
70%
2
20%
8
80%
3
30%
9
90%
4
40%
10
100%
5
50%