Manual
WARNINGS AND ALARMS – DEDICATED TO DIGITAL CONVECTION MODELS
All alarms are indicated by a buzzer. The buzzer can be silenced by pressing a key.
Err = CHAMBER PROBE ALARM:
This is triggered if the chamber probe fails. Everything is deactivated except for the light. The cycle in
progress is interrupted.
WARNINGS AND ALARMS – DEDICATED TO COMBI MODELS
All alarms are indicated by a buzzer. The buzzer can be silenced by pressing a key.
“Er1” CHAMBER PROBE ALARM:
This is triggered if the chamber probe fails. Everything is deactivated except for the light. The cycle
in progress is interrupted.
“Er2” CORE PROBE ALARM
This is triggered if the core probe in the food being cooked fails (where used). Everything is
deactivated except for the light. The cycle in progress is interrupted.
“ALL” MOTOR ALARM
This is triggered if the motor overheats. Everything is deactivated except for the light. The cycle in
progress is interrupted.
Once the alarm is silenced, press the ON/OFF button for 1 second to reset the alarm (the control
panel is set to OFF).
“H-t” CONTROL BOARD TEMPERATURE ALARM
This is triggered if the control board overheats. The cycle in progress is interrupted.
Once the alarm is silenced, press the ON/OFF button for 1 second to reset the alarm (the control
panel is set to OFF).
FAULT
CAUSE
SOLUTION
No water is input
into the steam
pipes.
Water inlet closed
Open water inlet
Incorrect connection to the mains water
supply
Check connection to the mains water supply
Water inlet filters obstructed by dirt.
Clean the filters
Water leaks out
from the washer
when the door is
closed.
Dirty washer
Clean the washer with a damp cloth
Damaged washer
Contact a specialist technician for repairs
(Customer Service).
Door closing mechanism problem
Contact a specialist technician for repairs
(Customer Service).
The fan stops
during operation
Motor safety thermostat triggered
Switch the oven off and wait for the motor's thermal
protection to restore automatically. It the problems
persists, contact a specialist technician for repairs
(Customer Service).
Motor condenser breakage
Contact a specialist technician for repairs
(Customer Service).