Manual

8
ENGLISH
EN
7. FAULTS
The information shown below aims to help with
the identification and correction of any anomalies
and malfunctions which could occur during use.
Some of these problems can be resolved by the
user. For the other, precise competency is
required and they must therefore only be carried
out by qualified personnel.
Problem Causes Solutions
Smell of gas.
Occasional leak due to flame
going out.
Close the gas supply valve and air
the room.
The pilot light does not ignite.
The spark ignition system does
not work
Check the efficiency of the ignition
devices. Ignite the pilot light
manually.
 Contact the after-sales
centre.
Presence of air in the pipes
after prolonged inactivity.
The pilot light does not stay on.
The thermocouple is not hot
enough.
Prolong the ignition operation.
The flame is yellow. The burner is dirty or wet.
Clean the burner and let it dry.
 If the problem persists,
contact the after-sales centre.
Difficulty in turning the burner
control knob.
Valve malfunction.
 Contact the after-sales
centre.
8. INSTALLATION
8.1. Packaging and Unpacking
Move and install the appliance respecting the
information provided by the manufacturer, shown
directly on the packaging, on the appliance and in
this manual.
The lifting and transportation system of the
packaged product envisages the use of a fork-lift
truck or a pallet stacker, using which particular
attention must be paid to balancing the weight n
order to prevent the risk of overturning (avoid
excessive tilting!).
! ATTENTION : When inserting the lifting
device, pay attention to the gas supply pipe and
the position of the feet.
The packaging is made of cardboard and the
pallet of wood. A series of symbols is printed on
the cardboard packaging which highlights, in
accordance with international standards, the
provisions which the appliances must be subject
to during loading, unloading, transportation and
storage.
On delivery, check that the packaging is intact and
has not suffered any damage during
transportation.
Any damage must be notified to the transportation
company immediately.
The appliance must be unpacked as soon as
possible to check that it is intact and undamaged.
Do not cut the cardboard with sharp tools in order
to prevent damage to the steel panels
underneath.
Pull the cardboard packaging upwards.
After having unpacked the appliance, check that
the features correspond to those requested in the
order;
For any anomalies, connect the dealer
immediately.
TOP
FRAGILE
HANDLE WITH
CARE
KEEP DRY