Manual

14
EN
ENGLISH
9.2. Replacing Burner Nozzle
For this operation, proceed as follows.
 Close the gas supply cock
 Open the hatch (A).
 Replace the nozzle (B) with one which is suitable for the type of gas used (see attachments)
 Restore initial operating conditions once the operation is complete.
 Close the hatch.
9.3. Replacing Burner Pilot Light Nozzle
For this operation, proceed as follows.
 Close the gas supply cock
 Open the hatch (A).
 Ignite the pilot light placed next to the burner.
 Unscrew the cap (B)
 Extract the nozzle (C) and replace it with one which is suitable for the type of gas used (see attached
tables)
 Remount the cap and restore initial conditions.
 Close the hatch (A).
A
B
A
B
C