User`s manual

Adding Printers in Windows
AXIS OfficeBasic USB User’s Manual 27
5. Select the type of printer you want to install from the diskette/CD and click
Next.
6. Select the Printers@TCP/IP Port and click Next.
7. Enter an appropriate name for your printer and choose whether you want
it to be the default printer. Click Next.
8. In the next window, do not
order a Test Page to be written, just click Finish.
9. AXIS Print Monitor now informs you that the printer has to be connected
to another port. Click OK.
10. The printer you have defined will now be displayed in the Printers Folder.
Right-click the printer object and select Properties from the Context menu.
11. Click the Details tab within the Properties page and then click Add Port to
display the available monitors.
12. Click the radio button “other”. Select AXIS Port and then click OK.
13. Select RAW (TCP/IP) as your choice of protocol and click OK.
14. Enter the IP address or the host name of your print server (Example:
AXIS100086) and assign a port number: 9902. Click OK.
15. The TCP/IP port will then be added automatically to the list of available ports.
Click OK and Apply.
16. You may now configure the port, as described below.
The Axis Printer Port is now installed.
Configure the Port 1. Select Settings | Printers from the Start menu and highlight the printer
you wish to configure. Select File | Properties | Details and click Port
Settings. Click the Configure Port button.
2. Choose whether error condition pop-up messages are to be displayed by
checking the box in the Configure AXIS Ports dialog. Define the frequency
at which the error messages should be displayed after retry. Click OK. Click
OK.
Note:
Even if the desired printer is available in the Manufacturers and Printers lists,
you are advised to use the print driver provided with the printer. This assures
you of the latest driver software.