User`s manual

The Parameter List
AXIS OfficeBasic USB User’s Manual 53
config file:
•
General Menu on page 53
•
TCP/IP Menu on page 53
•
SNMP Menu on page 54
•
NetBIOS/NetBEUI Menu on page 54
•
NetBIOS/NetBEUI Menu on page 54
•
AppleTalk Menu on page 55
•
USB1 Menu on page 55
General Menu In the print server’s Web interface, select Admin | General Settings =>
Change.
TCP/IP Menu In the print server’s Web interface, select Admin | Network Settings |
Detailed View | TCP/IP.
Parameter Default value (Possible values) Comments
NODE_ADDR. xx xx xx xx xx xx Node Address and serial number of the print server
NETWORK_SPEED.
AUTO_SENSE (AUTO_SENSE, 10_HALF_DX,
10_FULL_DX, 100_HALF_DX, 100_FULL_DX)
Network speed
PS_NAME. AXISxxxxxx
Print server name, where the x:s match the last 6 hex
digits of the serial number
ROOT_PWD. pass Root password
USERS. User and Printer Access List
BASE_URL. www.axis.com Base URL
CHARSET. ISO-8859-1 (ISO-8859-1, UTF-8) Character set
LANG. English (English, French, German, Spanish, Italian) Language to use in the Web interface
AXIS_PRINT_SYSTEM. YES (YES, NO) Axis print system support
DEF_OUT. USB1 Default printout destination
SYS_LOC. Location of print server
SYS_CONT. Print server responsible person
Parameter Default value (Possible values) Comments
TCP_ENB. YES (YES, NO) TCP/IP Enabled
INT_ADDR. x x x x IP address
DEF_ROUT. x x x x Default router (enter 0 0 0 0 for no router)
NET_MASK. x x x x
Net Mask (e.g. 255 255 255 0 for class C; 0 0 0 0 for
auto-sense)
LPD_BANN. OFF (OFF, AUTO, LAST) LPD banner page mode
DHCP_ENB. YES (YES, NO) DHCP Enabled
AUTOIP_ENB. YES (YES, NO) AutoIP Enabled
BOOTP_ENB. YES (YES, NO) BOOTP Enabled