Installation, Operation and Care of AXUM MIXER + SAVE THESE INSTRUCTIONS + GENERAL The AX-M40 planetary Mixer is a highly reliable machine that lets you handle even the most demanding of professional food applications with ease. Its advance design makes it ideal for mixing every type of dough, as well as for use in preparing eggs, cream, mayonnaise, and other food products. All they are specially designed for extra heavy-duty work in preparing all kinds of pizza and bagel dough.
INSTALLATION DIAGRAM mm) 585 1300 713 hrm 7 born () Ftd LOCATION Place the Mixer in a convenient location, and allow working space on the bowl lift side. All maintenance can be handled from this side, the top and the front. Set the mixer level and use shims if the floor is uneven. The machined edge on the top of the transmission case makes an excellent surface for leveling.
ELECTRICAL CONNECTIONS (Cord Connected Mixers) ® Before making the electrical connections, read the specifications on the nameplate to make sure that they agree with those of your electric service, ® Electrical connections should be made by qualified workmen, who will observe all applicable Safety Codes and the National Electrical Code. ® Be sure the planetary runs in the direction shown by the arrow in the planetary head. Reverse direction is forbidden, @ To start motor, push ON button.
OPERATION WARNING: @ KEEP HANDS, CLOTHING AND UTENSILS OUT OF BOWL WHILE IN OPERATION. & KEEP RIGID OR ICE-UP OBJECT AWAY FORM BOWL AND HUB ATTACHMENTS WHEN IN OPERATION. The GEARSHIFT LEVER is used to change speeds. Always stop the mixer before changing speeds. To change speeds, turn the switch OFF, move the gear shift lever to the desired speed, and turn the switch back ON. ® Speed 1 (low) This speed is for heavy mixtures such as bread dough, heavy batters, and potatoes.
1 [BOWL LIFT SLIDE WAY 2 BOWL LIFT HANDLE 3 |GEAR SHIFT LEVER 4 [DRIP RING 5 |AGITATOR 6 BOWL 7 THUMB SCREW 8 PLUGHOLE 9 [SAFETY GUARD 10 BOWL CLAMP 11 BOWL SUPPORT To install an agitator the bowl (No.6) must be installed and fully lowered by bowl lift handle Place the agitator in the bowl, push it up on the agitator shaft, and tum it clockwise to seat the shaft pin in the slot of the agitator shank.
The bowl must be installed before the agitator. To install the bowl, fully lower the bow! support. Position the bowl so the alignment bracket on the back of the bowl is in the bowl retainer and the alignment pins on the front of the bowl support fit in the holes on the sides of the bowl. DOUGH ARM: It is frequently used for heavy bread dough, and preferable to be use at low speed. The moisture content of heavy dough is critical when selecting proper mixing speed.
The meat and food chopper attachment should be operated in second or third speed. If material in the cylinder stalls the mixer, stop the mixer at once. DO NOT attempt to restart the mixer in a lower speed remove the adjusting ring, knife, plate, and worm and clear the obstruction. MAINTENANCE NOTE: ALL MAINTENANCE WORK SHOULD BE DONE ONLY AFTER UNIT HAS BEEN DISCONNECTED FROM ELECTRICAL POWER AND GROUNDING. CLEANING ® Never use a metal or stiff brush to clean the mixer.
The moisture content of heavy dough is a critical factor when selecting proper mixing speed. You should never use 2™ speed when mixing heavy dough with an Absorption Ratio (AR) of 50% or less. To determine the Absorption Ratio (AR) of a product, the water weight divide by the flour weight. Example: Calculate the Absorption Ratio of a mixture containing 5 Ibs. of water and 10 Ibs. of flour. 0.50 PRODUCT TOOL CAPACITY Ege Whites Whip 1-3/4 gt. Mashed Potatoes Beater 301bs Mayonnaise (Qts, Oil) Beater 13 gt.
