TECHNICAL MANUAL REV:201509.
INSTALLATION, OPERATION AND CARE OF MODEL AX-M60P GENERAL The AX-M60 planetary mixer is an advance design, highly reliable professional food processing tool, and is ideal for mixing all types of dough as well as eggs, cream, mayonnaise, etc. There are 2 speeds and various style attachments which can be selected. They are made of alloy aluminum to meet with hygiene standard. This model mixers is equipped with powerful 3 HP motors and strong gear drive design.
Electrical Connections (Cord Connected Mixers) · Before making the electrical connections, read the specifications on the nameplate to make sure that they agree with those of your electric service. · Electrical connections should be made by qualified technician or electrician, who will observe all applicable Safety Codes and the National Electrical Code. · Be sure the planetary runs in the direction shown by the arrow in the planetary head. Reverse direction is forbidden. · To start motor, push ON button.
OPERATION WARNING: MOVING PARTS, BEATER OR HOOK IN BOWL; KEEP HANDS, CLOTHING, AND UTENSILS OUT WHILE IN OPERATION. All models are furnished with two bu on-switches, which control power to the mixer. The GEAR SHIFT LEVER (No.3) is used to change speed. Always stop the mixer before changing speeds. To change speeds, turn the switch OFF, move the gearshi lever to the desired speed, and turn the switch back ON. · Speed 1 (low) – This speed is for heavy mixtures such as bread dough, heavy ba ers, and potatoes.
MAINTENANCE NOTE: All maintenance work should be done only a er unit has been disconnected from electrical power and grounding. CLEANING Never use a metal or s ff brush to clean mixer. Never clean the mixer with a water hose or any fluid under pressure. The mixer should be thoroughly cleaned daily. Bowl and agitators should be removed from the mixer and cleaned in a sink. The transmission case and planetary mechanism should be inspected weekly for leaks, damage, etc.
1
Description or Name 8 Parts No.
NO.
6 Z-15GW-B LIMIT SWITCH FOR BOWL LIFT 7 CABLE-12-3C-NEMA6-15P-UL POWER CABLE W/PLUG ABESMT44 EMERGENCY STOP (RED BUTTON) 9 ABMS800M LOCK NUT 10 ABAU8F01 (800F-X01) SWITCH TERMINAL C044M6L-AS-02 POWER INDICATOR A010220PSR MAIN SWITCH 8 11 12 10
Description or Name Qty 1 AGITATING SHA FT 11100B-02-001B 1 2 GEAR( 50T) 11100B-02-003 1 3 Resistance oil casing 11100B-02-004 1 4 Bevel gear 11193-02-006 1 4 WASHER 11193-02-006A 1 5 LOCK WASHER M55 1 6 LOCK NUT MN55 1 7 BALL BEARING 6207Z BR-6207 1 8 BALL BEARING 6010Z BR-6010 2 9 KEY KR-1/4*1/4*100 1 KR-09*14*52 1 10 KEY 11 Part No.
Description or Name 12 Part No.
Description or Name 13 Part No. Qty 1 PULLEY 11092-03-001 1 2 GEAR SHAFT 11100B-04-001 1 3 GEAR(22T) 11100B-04-004 1 4 BALL BEARING 6206 BR-6206 1 5 C- TYPE SNAP RING S25 STW-S25 1 6 KEY 1/4*1/4*50 KR-1/4*1/4*50 1 7 KEY KRR-10*08*28 1 8 BALL BEARING 6205 BR-6205 1 9 LOCK WASHER M40*1.
Description or Name 14 Part No.
Description or Name 15 Part No.
Description or Name 16 Part No. Qty 1 CONTROL PANEL 1109S-01-006D 1 2 HUB & CAM ASSY.
Description or Name 17 Part No.
Description or Name 18 Part No.
Description or Name Qty 1 BOWL CLAMP(LEFT) 11091-10-001A 2 1 BOWL CLAMP(RIGHT) 11091-10-001B 2 2 NUT 5/8*11NC NUT-5/8*11NC 4 3 BOWL SUPPORT 11091-10-003 1 4 BOWL RETAINER 11091-10-004 1 5 BOWL LOCATING PIN 11091-10-005 2 6 APRON 11091-10-006 1 7 MACH SCREW 3/16*1/4 S+R3/16*1/4 4 8 CAP SCREW 1/4*3/4 S-C-1/4*3/4 2 9 NUT 1/2*12NC NUT-1/2*12NC 2 SW-1/2 2 10 SPRING WASHER 1/2" 19 Part No.
Description or Name 21 Part No.
Description or Name 22 Part No. Qty 1 BEATER 11091-12-001 1 2 SS WHIP 11091-12-002 1 3 HOOK 11091-12-003 1 4 TROLLEY BASE 11091-12-011 1 5 WHEEL 2.
Description or Name 23 Part No.
GREASE AND OIL for AX-M60(AXIS M-60 s/n: 07040051 the machine is made before May 30, 2008). And the AXIS M-60 s/n: 07040051 is use grease in the transmission & planetary head. But since May 30, 2008, the AXIS M-60 is all use oil. SHELL DARINA Ep0 (GADUS) should be applied to the gear-box of mixers ranging from 7QT to 40QT, while SHELL SPIRAX S2 A is for either gear-box or planetary head for only 60QT and 80QT.
Scheduled maintenance NOTE: All maintenance work should be done only after unit has been disconnected from electrical power and grounding. Never use a metal or stiff brush to clean the mixer. Never clean the mixer with water hose or any fluid under pressure. Do not run the mixer for any extended period of time. Daily: The mixer should be cleaned daily. Bowl and agitators should be removed from the mixer and cleaned in a sink with soapy warm water.
Lubrication The mixer comes with grease-packed ball bearing that do not require regular lubrication. When it becomes necessary to repack them, contact your local service company or MVP group Corp. The polished drip cup protects against lubricant seeping out of the planetary into the bowl. The drip cup should be wiped clean monthly and inspected for excessive leakage. The drip cup may be removed by pulling it down.
MAINTENANCE DAILY WEEKLY MONTHLY CLEANING BOWL AGITATORS MIXER VISUAL INSPECTION PLANETARY BOWL LIFT BOWL GUARD TOUCH PAD GEAR BOX LUBRICATING BOWL LIFT TRACK WHAT LUBRICANT TO USE Never use vegetable oil. Vegetable oil may look like a lubricant but it does not work as a lubricant. It will congeal, gum up and solidify, acting as a glue. If vegetable oil has been used, the entire track system must be cleaned and grease with proper lubricant. A mineral oil will do. There are no specific brands.
AXIS M60P MIXER TECHNICAL MANUAL 28
