AX-MG / AX-MG MEAT GRINDER OVERVIEW The Meat Grinder is intended for heavy-duty work in commercial food processing applications. Their exceptional reliability and attractive, compact designs make them ideal for any open kitchen and supermarket. FEATURES Strict compliance with hygiene standard Listed by ETL sanitation, conforms to NSF standard No.
SPECIFICATIONS Model“) Productivity Blade Speed Motor Voltage Dimensions Wish a |C 11076071 vw AXMG12 | | 170(RPM) | 22055001 250 so on | 3002) 1 220/60/1 1s |0 10/6071 WAD*H AX-MG 240 (kg/hour)| 170(RPM) 220/501 500 250 * 500 mm | 508) 0 220/60/1 220 .
OPERATION IMPORTANT : Before connecting your unit to your power supply, be sure your machine’s electrical specifications, printed on the unit’s nameplate, match those of your local power. I. For first-time use, remove the grinder head and wash parts thoroughly. Reassemble according to the diagram included in these instructions, Before grinding, tighten the thumbscrew counter-clockwise until secure. Do not use a tool or over-tighten.
TROUBLE SHOOTING POSSIBLE CAUSE REMEDY 1. Thumb screw too tight. = Loosen and hand-tighten only until sung. Don’t over-tighten. 2.Discharge Plate is blocked ~~ > Switch reverse in second 3.Blade edges have dulled. -> Sharpen or replace. 4.Overloading and motor stop => Switch off and reset again MAINTENANCE NOTE : ALL MAINTENANCE WORK SHOULD BE DONE ONLY AFTER UNIT HAS BEEN DISCONNECTED FROM ELECTRICAL POWER AND GROUNDING. Never use a metal or stiff brush to clean the grinder.
AX-MG PARTS LIST & ASSEMBLY DIAGRAM ILLUS. NO. DESCRIPTION OR NAME PARTS NO.
AX-MG PARTS LIST & ASSEMBLY DIAGRAM ILLUS. NO.} DESCRIPTION OR NAME PARTS NO.
ILLUS. NO. DESCRIPTION OR NAME PARTS NO.
