User manual

AXIS Camera Station
Workspaces
Customize
Customize the look of AXIS Camera Station at startup, the sound played when an alarm or
event occurs, where to store snapshots and Playback behavior.
PTZ Settings
Add new or modify existing pan/tilt/zoom (PTZ) preset positions.
Bookmarks Edit and remove bookmarks.
Alarms and Tasks Tabs
TheAlarmsandTaskstabsatthebottomoftheLiveView,Recordings and Camera Management workspaces display recent alarms
and tasks.
1
Alarms tab
2
Tasks tab
3
Toolbar
Alarms Tab
The Alarms tab lists the event and system alarms that have been triggered.
Time The time the alarm was triggered or took place according to a schedule.
Alarm What kind of alarm was triggered.
Description A brief description of the alarm.
Server
(Displayed when connected to more than one AXIS Camera Station Server.) The AXIS Camera Station Server
where the alarm occurred.
Alarm Procedure Lists if there is a procedure configuredtotakeplac
e if an alarm is triggered.
Recording
Shows if the alarm contains a recording.
When an alarm occurs, right-click t he alarm in the list and select:
Go to Recordings Open the Recordings workspace and play the recording generated by the alarm.
Show Alarm Procedure Display instructions for the AXIS Camera Station user.
Acknowledge Alarms Acknowledge the alarm to notify other clients that the alarm has been taken care of.
Remove Alarm Entries Remove the a larm from the list.
Task Tab
The Ta
sks tab lists ta sks from t he Camera Management workspace.
20