User manual

AXIS Camera Station

How to...

Failover Recordings

A failover recording starts automatically if the connection between the camera and AXIS Camera Station is lost during an ongoing

recording. No new recordings can be started while the connection is lost.

Failover recordings will only affect H .264 recordings and can be enabled on cameras with sup port for storage (SD card) and ﬁrmware

5.20 or later.

To set up a failover recording, follow these steps:

1. From the Conﬁguration menu, select Recording Storage.

2. Under Cameras, select the camera and click Edit.

3. Check Enable failover recording.

4. Click OK to save settings.

Set Up Recording S

torage

Recordings can be stored on a server disk on the local computer or on a network disk. To prevent the h ard drive from becoming full a

maximum disk usage should be set. Additional server and network disks can be added for security and more space.

Note

Maximum drive space has precedence over the number of days to keep recordings. Recordings will be deleted if there is no

room left in the allotted drive space.