User manual

AXIS Camera Station
How to...
Create a New View Group
To create a View Group, follow these steps:
1. In the Live View workspace, right-click My Views or Shared Views in the View Groups pane.
2. Choose NewViewGroup.
3. Enter a descriptive name for the group.
4. Click OK to save and close the dialog.
To add a Map, Sequence or Split View follow the instructions Create a Map, Create a Sequence or Create a Split View.
Create a Split View
To create a split view, follow these steps:
1. In the Live View workspa ce, right-click My Views, Shared Views or a created view group and choose New Split View
2. Enter a descriptive name and choose a layout from the drop-down list:
- Standard — optimized for sta ndard resolution came ras (4:3 format)
- Wide — optimized for HDTV and megapixel cameras (16:9 form at)
- Corridor — optim ize d for HDTV and megapixel cameras where the i m age ha s been rotate d by 90 degrees (16:9 format,
90 degree rotation)
3. Drag cameras, views and maps to the desired camera views into place.
4. Click OK to save settings and close dialog.
You can define a frame in the view as a Hotspot that will automaticall y load the view from another camera when it is clicked on. This
is particularly useful for a symmetric views with one large view frame and several smaller views. The large view frame is typically
defined as the hotspot. To define a hotspot, c lick in the desired section of the view and click Set Hotspot.
32