User manual

AXIS Camera Station
Event Configuration Wizard
Theruleisconfigured in four s teps, described in the following sections:
• Triggers — add one or more triggers
• Actions — a dd one or more actions
• Schedule — select a schedule for the rule
• Details — check settings and enable the rule
Add T riggers
A rule can have one or more triggers. W hen using several triggers, only one of the triggers needs to become active to activate the rule.
In this example, an I/ O trigger will be created.
Add an I/O Trigger
To create an I/O trigger, follow these step
s:
1. In the New Rule dialog, click Add to op
en the Add Trigger dialog.
2. Click Advanced and selec
t Input/Output. The Create I/O Trigger dialog opens.
3. Select the input por
t on the camera monitoring the doo r and select thetriggerstatethatwillactivatetherulewhen
the door is open (the state Active in this example). Available values depend on how the I/O port was defined under
Configuration > I/O Settings.SeeAdd Inputs and Outputs, on page 38 for more info rmation.
4. Since the trigger can go off many times and create unwanted events, an option is to set the Trigge r period s lide r so that
any trigge
rs that come in under this period will be treated as one trigger.
5. Clic
k OK to save the trigger settings.
6
.
W
hen all triggers have been added, click Next to move to the Actions step.
44