Specifications

 INTERFACE DESCRIPTION
Pin No. Symbol
I/O or
connect to
Description
When
not in
use
1 NC - No connection -
2 V0 - LCD driver supply voltages. -
3 V4 - LCD driver supply voltages. -
4 V3 - LCD driver supply voltages. -
5 V2 - LCD driver supply voltages. -
6 V1 - LCD driver supply voltages. -
7 C2- -
Capacitor 2- pad for internal DC/DC voltage
converter.
-
8 C2+ -
Capacitor 2+ pad for internal DC/DC voltage
converter.
-
9 C1+ -
Capacitor 1+ pad for internal DC/DC voltage
converter.
-
10 C1- -
Capacitor 1- pad for internal DC/DC voltage
converter.
-
11 C3+ -
Capacitor 3+ pad for internal DC/DC voltage
converter.
-
12 VOUT - DC/DC voltage converter output -
13 VSS 0V Ground -
14 VDD 3.0V Supply logic power -
15 SI H/L Serial data input terminal. -
16 SCL H/L Serial clock input terminal. -
17 RS H/L
This is connected to the least significant bit of the
normal MPU address bus, and it determines
whether the data bits are data or a command.
-
18 /RES H/L
When /RES is set to L, the settings are initialized.
The reset operation is performed by the /RES signal
level
-
19 /CS1 H/L This is the chip select signal. -
20 NC - No connection -
 REFERENCE APPLICATION CIRCUIT
Please consult our technical department for detail information.
P.9
MULTI-INNO TECHNOLOGY CO.,LTD.
MODULE NO.: MI12864J-G-1
Ver 1.0